This
feature prevents rapid changing
of
the
mirror from
the night mode to the day mode as you drive under
lights and through. traffic.
The reverse mode
is
another important feature
of
the
automatic mirror. When the shift lever is placed
in
REVERSE
(R),
the mirror changes to the'day mode.
This
gives you a bright image
in
the mirror as you
back up.
Cleaning
the
Use a cotton
swab
and glass cleaner to
clean
the front
and
rear photocells that
make
the
auto-dimming
feature work.
Once the compass is calibrated, it does not need
to
be
recalibrated.
To
calibrate the compass:
1.
2.
3.
Set the switch on the mirror control
to
C/M.
Turn
the vehicle ignition switch on. The letter
C
should be displayed in the mirror compass window.
If
not, hold
the
CAL
switch (on
the
bottom of the
mirror) for more than
10
seconds, and the letter
C
will appear.
To
hold
in
the
CAL
switch, insert a
paper clip into
the
small hole on the bottom
of
the
mirror housing. The display will show
a
number
first, but keep holding until the letter
C
appears.
For quick calibration,
drive
the vehicle
in
a
360-degree circle at less than
5
mph
(8
krnh)
until
the
display reads
a
compass direction. For normal
calibration, drive
the
vehicle on your everyday
routine, and the compass will eventually calibrate.
To Next Page
Loading...
