Ventilation
Tips
a
Keep the hood and front
air
inlet free of ice, snow or
any other obstruction (such as leaves). The heater
and defroster will work
far
better, reducing
the
chance
of
fogging the inside of the windows.
0
When
you
enter a vehicle
in
cold weather, adjust the
fan to
the
highest speed for
a
few moments before
driving
off.
This helps clear the intake outlets
of
snow
and moisture, and reduces the chance of
fogging
the
inside of the windows.
0
Keep the air path under
the
front seats clear
of
objects. This helps circulate air throughout
your vehicle.
Use
DEFROST
to remove fog or ice from the windshield
quickly in extremely humid or cold conditions.
Press the DEFROST button.
If
you
select
DEFROST,
adjust the
fan
speed by pressing the
fan
button
up
or
down.
If
you
select DEFROST from
AUTO,
the system
will control the fan speed. The temperature also needs to
be adjusted by turning
the
TEMP/AUTO
knob.
Note that recirculation
is
not available in the defrost or
defog modes.
The lines you see
on
the
rear window wm the
glass. Press
this
button to
turn
on
the rear defogger.
With
it,
the rear window
and both outside rearview
mirrors
are
heated.
The system will automatically shut
off
after
10
minutes.
If
further defogging is desired, press
the
button again.
Do not attach a temporary vehicle license, tape or decals
across the defogger grid on the rear window.
cut and damage the heating
grids.
Your
warranty
would not cover this damage.
And
don’t put
decals
there;
you
might have
to
scrape them
off.
To Next Page
Loading...
