Cadillac 1997 Eldorado - Page 258

8. Lower the vehicle by rotating the wheel wrench
counterclockwise. Lower the jack completely.
-
9. Tighten the wheel nuts
firmly in a criss-cross
sequence
as shown.
Incorrect wheel nuts or improperly tightened
wheel nuts can cause the wheel
to become loose
and even come
off. This could lead to an accident.
Be sure to
use the correct wheel nuts. If you have
to replace them, be sure to get new GM original
equipment wheel nuts.
Stop somewhere
as soon as you can and have the
nuts tightened with a torque wrench to I00 lb-frt
(140 Nm).