It’s a good idea to clean ox replace the wiper blade
assembly on a regular basis
or
when
worn.
For proper
windshield wiper blade length and type, see
“Normal
Maintenance Replacement
Parts”
later
in
this section.
To
replace the wiper blade assembly:
I
1.
Turn the ignition key to
ACCESSORY
and
turn
the
wipers on. Position the wipers on the windshield
in
the “mid” wipe position. Then
with
the door open,
turn the key
to
OFF.
2.
Insert a screwdriver into the slot
as
shown and press
down to release the wiper blade assembly.
3.
Align
the wiper
arm
pin with the hole on the wiper
blade assembly
and
snap
it
into
place
to install.
To Next Page