Warning: The temperature grade for this tire
is
established for a
tire
that
is
properly inflated and not
overloaded. Excessive speed, underinflation
or
excessive loading, either separately
or
in combination,
can cause heat buildup and possible tire failure.
The wheels on your vehicle were aligned and balanced
carefully at the factory to give you the longest
tire
life
and best overall performance.
Scheduled wheel alignment and wheel balancing are not
needed. However, if you notice unusual tire wear
or
your vehicle pulling one way or the other,
the
alignment
may need to be reset.
If
you notice your vehicle
vibrating when
driving
on
a smooth road,
your
wheels
may need to be rebalanced.
Replace any
wheel
that is bent, cracked or badly rusted
or corroded.
If
wheel nuts keep coming loose, the wheel,
wheel bolts and wheel nuts should be replaced.
If
the
wheel leaks air, replace
it
(except some aluminum
wheels, which can sometimes be repaired). See
your
Cadillac dealer
if
any
of
these conditions exist.
Your dealer will know the kind of wheel you need.
Each new wheel should have the same load-carrying
capacity, diameter, width, offset and be mounted the
same way
as
the one
it
replaces.
If
you need
to
replace any
of
your
wheels, wheel bolts
or
wheel nuts, replace them only with new
GM
original
equipment parts. This
way,
you
will
be
sure to have the
right wheel, wheel bolts and wheel nuts for your
Cadillac model.
Using
the
wrong
replacement wheels, wheel
bolts
or
wheel
nuts
on your
vehicle can be
dangerous. It
could
affect the braking and
handling
sf
your vehicle, make your tires lose air
and make
YOU
lose
control.
You
could have
a
c~llision
in
which you or others could be injured.
Always
use
the correct wheel,
wheel
boats
and
wheel
nuts
for replagment.
To Next Page