Use a clean cloth moistened
in
warm, soapy water (use
mild dish washing soap). Dry the wood immediately
with a clean cloth.
Vacuum around
a
speaker cover gently,
so
that
the
speaker won’t be damaged. Some spots and stains
will clean
off
better with just water and mild soap.
If
something gets
on
one
of
them and
you
need to use
a solvent, follow these steps:
I.
Gently scrape excess soil from the
trim
material with
2.
Use very little cleaner, light pressure and clean cloths
(preferably cheesecloth). Cleaning should start at the
outside of the stain, “feathering” toward the center.
a clean, dull knife or scraper.
3.
Keep changing
to
a clean section
of
the cloth.
4.
When you clean a stain
from
fabric, immediately
dry the area with a blow dryer
to
help prevent a
cleaning ring.
a
Keep belts clean and dry.
U
CAUTION:
Do
not
bleach or dye safety belts.
H
you
may
severely weaken them.
In
a
crashg
they
might
not
be able
to
provide
adequate protection.
Clean
safety
belts
only
with
mild
soap
and
lukewarm
watere
ss
Glass should be cleaned often.
GM
Glass Cleaner
(GM
Part
No.
1050427)
or
a
Liquid household glass cleaner
will remove normal tobacco smoke and dust films on
interior glass.
Don’t use abrasive cleaners
on
glass, Decause they may
cause scratches. Avoid placing decals on the inside rear
window, since they
may
have to be scraped
off
later.
If
abrasive cleaners are used
on
the
inside
of
the
rear
window, an electric defogger element
may
be damaged.
Any temporary license should not
be
attached across
the
defogger
grid.
To Next Page