If
the belt stops before it reaches the buckle;
tilt
the
latch plate and keep pulling until you
can
buckle it.
Pull up
on
the
latch plate to make
sure
it is secure.
If
the belt is not long enough, see “Safety Belt
Extender” at the end
of
this section. Make
sure
the
release button
on
the buckle is positioned
so
you
would be able to unbuckle the safety belt quickly
if
you ever had
to.
3.
To
make the lap part tight, pull down on the buckle
end of the belt as you pull up
on
the shoulder
part.
To Next Page
Loading...
