1.
2.
3.
4.
Make the belt as long as possible
by
tilting the latch
plate
and
pulling it along the belt.
Put the restraint on the seat. Follow the instructions
for
the child restraint.
Secure the child in the child restraint as
the
instructions say.
Run
the vehicle’s safety belt through or around the
restraint. The child restraint instructions
will
show
you
how.
5.
Buckle
the
belt. Make sure the
release
button is
positioned
so
you
would be able to unbuckle the
safety belt quickly
if
you ever had
to.
6.
To
tighten the belt, pull its free end
while
you
push
down
on
the child restraint.
7.
Push
and
pull
the
child restraint
in
different
directions to be sure it
is
secure.
If
it isn’t, secure
tlr
restraint
in
a
different
place
in
the vehicle and
contact the child restraint maker
for
their advice
about how
to
attach the child restraint properly.
To Next Page
Loading...
