5-7
8. Now connect the
black negative (
-) cable
to the good battery’s
negative (-) terminal.
Don’t let the other end of the negative (
-) cable touch
anything until the next step. The other end of the
negative (-) cable doesn’t go to the dead battery.
Your vehicle has a
remote negative (
-)
terminal, marked
“GND (-)” located
near the power
steering fluid reservoir.
Attach the cable to the
remote negative (-)
terminal provided.
If the SECURITY light flashes, wait until the light
stops flashing before starting the engine.
9. Now start the vehicle with the good battery and run
the engine for a while.
10. Try to start the vehicle with the dead battery.
If it won’t start after a few tries, it probably
needs service.
To Next Page
Loading...
Need help?
General
