2-88
TURN SIGNAL ON - 20: This message is a reminder,
after driving about 1 mile (1.6 km/h), that you have the
turn signal on. A multiple chime will also sound when
this message is displayed.
VEHICLE OVERSPEED
- 52: This message is
displayed when the vehicle speed exceeds a certain limit
as required by some export countries. A continuous
chime will also sound when this message is displayed.
VEHICLE SPEED LIMITED TO XXX MPH
(KM/H)
- 113: A failure in the suspension control
system has occurred when this message appears.
The Powertrain Control Module (PCM) determines
the speed your vehicle is limited to. Have your vehicle
serviced if this message appears. (The XXX indicates
the speed your vehicle is limited to.)
Memory and Personalization Features
(If Equipped)
Your vehicle may be equipped with the following
features that can be individually programmed, or
personalized, for up to two drivers. For a brief
description of the features, look up each feature in
the Index for a page reference.
Entering Feature Programming
To enter the feature programming mode,
do the following:
1. Turn the ignition to RUN.
2. Press and hold the SKIP INFO and NO INFO
RESET buttons at the same time until the first
programmable feature is displayed.
To Next Page
Loading...
