5-9
9. Connect the other
end of the negative (
-)
cable to the remote
negative (-) terminal
marked “GND (
-)” on
the vehicle with the
dead battery.
10. Now start the vehicle with the good battery and
run the engine for awhile.
11. Try to start the vehicle with the dead battery.
If it won’t start after a few tries, it probably
needs service.
NOTICE:
Damage to your vehicle may result from
electrical shorting if jumper cables are removed
incorrectly. To prevent electrical shorting, take
care that the cables don’t touch each other or
any other metal period. The repairs wouldn’t
be covered by your warranty.
To Next Page
Loading...
