2-93
Annual Mileage
D
The annual mileage displayed is the mileage
accumulated since the annual mileage was reset.
D
Pressing the RESET button will reset the annual
mileage to 0.
D
Pressing the arrow button will display the ratio of
personal trip computer mileage to annual mileage
as a percent.
D
Pressing the arrow button again will display the ratio
of business trip computer mileage to annual mileage
as a percent.
Menu
Press the MENU button to choose a feature you would
like to personalize (the features are listed below). Each
press of the button will display a new item that can be
personalized. Use the arrow button to choose the
setting you would like to use within the chosen feature.
For example: Say you would like to personalize the
automatic door locks so that the automatic locking
feature is disabled. You would do the following:
1. First press the MENU button until you reach the
Automatic Door Lock screen.
2. Next, press the arrow button until you find the
Disabled setting.
3. The setting is now actually set without having to
do anything else. You can do one of three things
at this point:
D
You can leave the personalization mode by
pressing FUEL or TRIP.
D
You can just let the SIC exit the personalization
mode on its own by waiting approximately
15 seconds without touching any buttons,
D
or you can press the MENU key to move on to
the next programmable feature.
The following is a list of the personal settings that can
be changed:
Automatic Door Lock
D
Enabled: Doors automatically lock when
transmission is shifted out of PARK (P).
D
Disabled: Doors do not lock automatically.
To Next Page