1-13
3. Let go of lever 3 and pull the seat completely down.
4. Push down on the seat firmly. Try pulling it up to be
sure it is locked into place.
5. Pull up on the release
lever labeled 1 and then
pull up on the seatback
or the assist strap
located on the outboard
side of the seat until the
seatback locks into the
upright position.
Removing the Third Row Seats
Your vehicle’s third row seats can be taken out for
more cargo space. To remove a rear split bench seat,
do the following:
1. Open the liftgate.
2. Pull up on the release
lever, labeled 1, located
on the rear of the
seatback and push the
seatback forward.
To Next Page
Loading...
