5-34
Rear Access Panel
A. Speaker
B. Bottle Jack
C. Wing Nut
D. Retaining Hook
E. Wheel Blocks
F. Cover Panel
1. Put the tool kit, with the jack tools and gloves,
in the tool bag and place in the retaining clip under
the driver’s side second seat.
2. Tighten down with the wing nut.
3. Then, assemble wheel blocks and bottle jack
together with the wing nut and retaining hook.
4. Position behind the jack storage cover in the left
rear side panel just below the speaker and tighten,
adjusting clockwise until the jack is secured tight in
the mounting bracket.
To Next Page
Loading...
