2-152
To change the mode using the Navigation system, do the
following:
1. Enter the Personalization menu following the
instructions listed previously.
2. Scroll to Enhanced Chime Volume using the
TUNE/SEL knob to highlight it.
3. Press the TUNE/SEL knob to switch back and forth
between the normal and loud settings.
You will hear a chime as an example of the volume
level chosen.
The mode you selected is now set. You can either exit
the programming mode by following the instructions
later in this section or program the next feature available
on your vehicle.
Exiting the Personalization Menu
To exit the personalization portion of the SETUP menu
using the Base audio system, press the BACK key once
you’ve finished making your selections. You will return
to the main audio screen.
To exit Feature Programming using the Navigation
system, press the multi
-function button next to the Back
prompt once you’ve finished making your selections.
You will return to the Main Menu.
To Next Page
Loading...
