To
operate the easy entry seat, do the following:
1.
Lift the release lever on the back of the seat,
upward.
2.
Tilt the seatback toward the front of the vehicle and
the seat will release.
3.
Pull (push
if
you are exiting the third row with no
assistance) the seat forward until it stops.
If
the seatback isn’t locked,
it
coulc love
forward
in
a sudden stop or crash. That could
cause injury to the person sitting there. Always
press rearward on the seatback to be sure
it
is
locked.
A safety belt
thz
s
improperly routec
,
lot
properly attached, or twisted won’t provide the
protection needed in a crash. The person
wearing the belt could be seriously injured.
After raising the rear seatback, always check
to be sure that the safety belts are properly
routed and attached, and are not twisted.
Be sure to return the seat
to
the passenger position
when finished. Pull forward and push rearward
on the
seat
to
make sure
it
is locked in place.
1
-8
To Next Page
Loading...
