Checking
Brake
Fluid
You can check the brake fluid without taking off the cap.
Just look at the brake fluid reservoir. The fluid level
should be above
MIN.
If it isn’t have your brake system
checked
to
see
if
there is a leak.
After work is done on the brake hydraulic system, make
sure the level is above the MIN but not over the
MAX mark.
What
to
Add
When you do need brake fluid, use only DOT-3 brake
fluid. Use new brake fluid from a sealed container
only. See
Part
D:
Recommended Fluids and Lubricants
on page
6-
16.
Always clean the brake fluid reservoir cap and the area
around the cap before removing it. This
will
help
keep dirt from entering the reservoir.
With the
w.-ng
kind
L.
.,-id
in your brake
system, your brakes may not work well,
or
they may not even work at all. This could
cause a crash. Always use the proper brake
fluid.
5-40
To Next Page
Loading...
