Head Restraints
Adjust your head restraint so that the top of the restraint
is closest to the top of your head. This position
reduces the chance of a neck injury in a crash.
The front seat head restraints move up and down.
Press the button located at the bottom of the head
restraint and raise or lower the head restraint. The head
restraints tilt forward and rearward, also.
The second row outboard head rests work the same as
the front seat head restraints except they do not tilt.
The third row head rests are not adjustable. They are
removable. They must be removed before the third
row seat can be folded. To remove the third row head
rests, press the button located on the top of the
seatback and pull up on the head rest. Store the head
rests in the storage compartment behind the third
row. Open the cover and insert the head rest posts
through the slats in the carpet. Position and snap the
head rests in the provided storage tray.
1-6
To Next Page
Loading...
Need help?
General
