{CAUTION:
• On winding roads, ACC may not detect a
vehicle ahead. You could crash into a
vehicle ahead of you. Do not use ACC on
winding roads.
• In heavy stop-and-go traffic, ACC may not
have time to slow your vehicle enough to
avoid a collision because of the rapidly
changing traffic conditions. Do not use
ACC in heavy stop-and-go traffic.
• On slippery roads, fast changes in tire
traction can cause needless wheel
spinning, and you could lose control. Do
not use cruise control on slippery roads.
• When visibility is low, such as in fog, rain
or snow, you can not tell how far away
things are and ACC performance is limited.
There may not be enough distance to
adapt to the changing traffic conditions.
Do not use cruise control when visibility
is low.
Some of the ACC controls
are located on the end of
the multifunction lever.
9 (Off): This position turns the system off.
R (On): This position turns the system on.
S (Resume/Increase): Push the switch to this symbol
to make the vehicle resume to a previously set speed
or to increase the set speed when ACC is already active.
T (Set/Decrease): Press this button to set the
speed or to decrease the set speed when ACC is
already active.
3-13
To Next Page
Loading...
