Window Commands
Windows up, windows down: These commands
instruct the system to express up or express down the
windows. The system will request that you confirm.
After the prompt, state “Yes” to confirm or “No” to cancel.
Windows help: This command instructs the system to
assist with window commands. Help commands will
be displayed on the map screen when the vehicle
is stopped.
Phone Commands
These commands will only function if a Bluetooth
®
phone has been paired with the navigation system,
is available in the vehicle, and is on.
Phone/telephone enter: These commands instruct the
system to dial a phone number after it is stated. State the
number including the area code (ex. 555 123 4567) then
state “dial.” You can state the phone number in partial
segments or you can state the entire phone number.
If the number is stated in partial segments the system will
play back each segment.
Phone/telephone redial/recall: These commands
instruct the system to redial a phone number.
Phone/telephone help: These commands instruct the
system to assist with phone commands. Help commands
will be displayed on the map screen when the vehicle
is stopped.
OnStar
®
Command
OnStar: This command instructs the system to connect
to OnStar
®
. You will enter the OnStar
®
voice recognition
system. Refer to your OnStar
®
manual for more
information.
4-15
To Next Page
Loading...
