Touch Info on the three routes screen to access the
INFO FOR 3 ROUTES screen. From this screen,
you can view the following information for the different
planned routes:
G (Estimated Travel Time): This icon shows the
route’s estimated time of travel.
J (Straight-Line Distance): This icon shows the
route’s straight-line distance to destination.
W (Toll Road): This icon shows the route’s toll road
distance information.
c (Freeway Travel): This icon shows the route’s
freeway distance information.
b (Ferry): This icon shows the route’s ferry distance
information.
{ (Time-Restricted Roads): This icon shows the
route’s time-restricted road information.
Keyless Access System
When you start your vehicle, you will see Driver 1 or
Driver 2 displayed on the cluster. If personalization
is turned off in feature programming, a message will not
appear on the cluster. The number on the back of
the transmitter corresponds to driver 1 or driver 2.
The navigation system can store memory points
for driver 1 and 2 individually. See Personalization on
page 5-2 for more information.
2-53
To Next Page
Loading...
