Sunroof
Your vehicle may have a power sunroof. It will operate
when the ignition is turned on, or in ACCESSORY,
or when Retained Accessory Power (RAP) is active. See
Retained Accessory Power (RAP) on page 2-24.
The sunroof controls
are located on the
overhead console.
@(Half Open): Turn the control clockwise to this
position to open the glass panel half way. The sunshade
will open with the glass panel, or it can be opened
manually.
P(Comfort Stop): Turn the control clockwise to
this position to open the glass panel about three
quarters of the way. The sunshade will open with the
glass panel, or it can be opened manually.
This is called the comfort stop position. It provides less
wind noise than the full-open position.
A(Full Open): Turn the control clockwise to this
position to open the glass panel all the way. The
sunshade will open with the glass panel, or it can be
opened manually.
I(Vent): Turn the control counterclockwise to this
position to use the vent feature. The glass panel will tilt
upward from the vehicle. The sunshade must be
opened manually.
?(Close): Turn the control to this position to close
the sunroof. The sunshade must be closed manually.
Anti-Pinch Feature
If an object is in the path of the sunroof when it is
closing, the anti-pinch feature will detect the object and
stop the sunroof from closing at the point of the
obstruction. The sunroof will then return to the full-open
or vent position. To close the sunroof once it has
re-opened, turn the control to the closed position.
2-51
To Next Page
Loading...
