Add Waypoint
Add Waypoint: Select this screen button from the
Route screen. This feature allows you to add, up to three
waypoints, to the current route, between your start
point and final destination. Once a waypoint has been
added, the points can be edited or deleted.
To add a waypoint:
1. Press the DEST hard key.
2. Select the Add Waypoint screen button from the
Route screen.
3. Using the desired method of entering a destination,
enter the way point. See “Enter Destination”
previously for more information.
4. Select the route preference (Fastest, Shortest, or
Other). The system will calculate the route and the
route will be highlighted.
5. Select the Start Guidance screen button. You are
now ready to start your route.
6. To add the second and third waypoints, follow
Steps1–3,thesystem will display the Route
screen.
7. Press the Add screen button, where you would like
the next waypoint to fall on the route.
8. Select the route preference (Fastest, Shortest, or
Other). The system will calculate the route and the
route will be highlighted.
9. Select the Start Guidance screen button. You are
now ready to start your route.
2-23
To Next Page
Loading...
