Once you access the CD changer screen, you can select
one of the numbered buttons to go from one compact disc
to another among those loaded in the CD changer and
use the arrows to rewind or fast forward through the disc
selected.
The following features are also available from this
screen:
• LOAD
• EJECT
• SCAN THE DISCS or SCAN THE TRACKS
• and RANDOM ALL or RANDOM DISC.
The numbered buttons (1 through 6) represent the order
of the discs loaded in the changer. If there are only
two CDs loaded, buttons 1 and 2 will only be available
to choose from.
LOAD: Touch this button once each time you wish to
load a CD into the changer. It may take up to 10 seconds
for the changer to accept the CD into the slot depending
on the changer initializing. Repeat this procedure for
loading up to six discs. Press and hold the LOAD button
until a beep is heard to put the changer in LOAD ALL
mode. Once the Insert CD message is displayed, you
can load all six discs, one after the other.
r(Play): Touch this button to begin playing a CD.
RANDOM DISC: Touch this button to hear the tracks
in random, rather than sequential, order on the disc
selected. Press the TUNE/SEEK hard key to randomly
seek through the tracks on this disc. Touch RANDOM
DISC again to turn off random play mode.
SCAN TRACKS: Touch this button to hear the first
10 seconds of each track on the selected disc. Touch
this button again to stop scanning. The CD will mute
while scanning.
r(Rewind): Touch this button to rewind quickly
through a track selection.
CD Changer Screen
3-24
To Next Page
Loading...
