Seek Up: This command will cause the selected audio
source to seek up to the next strongest signal.
Seek Down: This command will cause the selected
audio source to seek down to the next strongest signal.
Stop Scan: This command will cause the audio
source to stop scanning for the next strongest signal.
CD Changer Commands
Track Up: This command will cause the CD changer to
skip up to the next track.
Previous Track, Track Down: This command will
cause the CD changer to go to the previous track.
Screen Commands
Screen Day Mode, Day Mode On: These commands
will adjust the system’s screen setting to the day mode.
Screen Night Mode, Night Mode On: These
commands will adjust the system’s screen setting to the
night mode.
Screen Auto Mode, Auto Mode On: These commands
will adjust the system’s screen setting to auto mode.
Screen Off: This command will turn the system’s
screen display off.
Position Commands
Current Position, Current Location, Show Current
Position, Show Current Location: These commands
will cause the system to display the vehicle’s current
location on the map screen.
Map: This command will cause the system to display
the map screen.
Map Commands
Zoom In: This command will cause the system to zoom
in when on the map screen.
Zoom Out: This command will cause the system to
zoom out when on the map screen.
Maximum Scale: This command will cause the system
to zoom out to the maximum available map scale
when on the map screen.
Minimum Scale: This command will cause the system
to zoom in to the minimum available map scale when
on the map screen.
Heading Up, Change to Heading Up: These
commands will cause the system to display the Vehicle
Up heading when on the map screen. The map scale
should be set for under 2 miles (4 km).
4-4
To Next Page
Loading...
