Guidance Volume
To adjust the volume of voice guidance prompts, do the
following:
1. Press the CONFIG hard key.
2. Press the
3 (navigation set up) screen button.
3. Press the
> Volume screen button.
4. Select the desired volume or select Off. The system
will play back the new volume level.
See “Volume” under Configure Menu on page 2-57 for
more information.
Cleaning the Display
If the panel or the display is stained, wipe it with a dry,
soft cloth, such as a silicon cloth.
Notice: If you use abrasive cleaners when cleaning
glass surfaces, you could scratch the glass. When
cleaning the glass, use only a soft cloth and do not
spray cleaner directly on the system.
Do not apply spray cleaner directly to the system,
the cleaner could affect the mechanical parts.
Do not wipe the panel with a hard cloth or use a volatile
liquid such as thinner or alcohol, it could scratch the
surface or erase the characters.
1-12
To Next Page
Loading...
