SERVICE TRACTION CONTROL
This message displays when there is a problem
with the Traction Control System (TCS). When this
message is displayed, the system will not limit
wheel spin. Adjust your driving accordingly.
See your dealer for service. See Traction Control
System (TCS) on page 303 for more information.
SERVICE TRANSMISSION
This message displays when there is a problem
with the vehicle’s transaxle. Have your vehicle
serviced by your dealer.
SERVICE VEHICLE SOON
This message displays when a non-emissions
related malfunction occurs. Have your vehicle
serviced by your dealer as soon as possible.
SET SPD (Speed)
If your vehicle has Adaptive Cruise Control (ACC),
this message displays whenever the cruise
control is set. First, the “CRUISE SET TO
XXX MPH (km/h)” message appears. After a
few seconds, the “CRUISE SET TO XXX MPH
(km/h)” message clears and the message
“SET SPD XX” displays at the bottom of the DIC.
See “CRUISE SET TO XXX MPH (km/h)”
earlier in this section and Adaptive Cruise Control
on page 173 for more information.
SPEED LIMITED TO XXX MPH (km/h)
This message displays when your vehicle speed is
limited to 80 mph (128 km/h) because the
vehicle detects a problem in the speed variable
assist steering, magnetic ride control, or automatic
leveling control systems. Have your vehicle
serviced by your dealer.
STABILITRAK NOT READY
If your vehicle has StabiliTrak
®
, this message may
display and the Traction Control System and
StabiliTrak
®
Warning Light on the instrument panel
cluster may be on after first driving the vehicle
and exceeding 19 mph (30 km/h) for 30 seconds.
The StabiliTrak
®
system is not functional until
the light has turned off. See StabiliTrak
®
System
on page 305 for more information.
249
To Next Page
Loading...
Need help?
General
