Compact Spare Tire and Tools
Use the following diagram as a guide for storing
the compact spare tire and tools in the trunk:
A. Compact Spare Tire
Cover
B. Plastic Wing Nut
C. Retainer
D. Jack Container
Package (With
Wheel Wrench
and Jack)
E. Compact Spare
Tire
F. Foam Support
G. Bolt
1. Open the trunk. See Trunk on page 101.
2. Make sure the foam support (F) is in place in
the trunk area.
3. Reinstall the compact spare tire (E) making
sure to line up the wheel center hole with the
bolt (G) and place on the compartment floor.
4. Insert the jack container (J) with wheel
wrench (H) and jack (I) into the center of
the compact spare tire making sure to line up
the wheel nut hole with the bolt (G) on the
compartment floor.
5. Secure the tire and wheel with the retainer (C)
and wing nut (B).
6. Reinstall the compact spare tire cover (A).
474
To Next Page
Loading...
