153 . . .
–
Section 1
LOADING AND REMOVING
DISCS
With the compact disc changer,
you can play up to six discs
continuously.
To load one compact disc:
1. Press the load button .
2. When the message appears on
the display, insert the CD label
side up, partway into the slot.
The player will automatically
pull the CD in.
The disc and track numbers
appear on the display.
To load two or more compact
discs:
1. Press and hold the load but-
ton for five seconds.
You will hear a beep and
LOAD ALL DISCS will appear
on the display.
2. When the message appears on
the display, insert the next CD
label side up, partway into the
slot. The player will automati-
cally pull the CD in.
3. Repeat the previous step until
all the discs are loaded.
Do not try to load more than
six discs.
4. When you are done loading
discs, press the load button
to cancel the loading function.
The disc and track numbers
appear on the display.
Ejecting Discs
Press and release to eject the
disc that is currently playing.
You will hear a beep.
EJECTING DISC will appear on the
display.
Once the disc is ejected, REMOVE
DISC will appear on the display.
If the disc is not removed within a
short period of time, it will auto-
matically be pulled back into the
player.
To eject all the discs, press and
hold the eject button for two
seconds.
AKENG40_CTS Page 153 Wednesday, July 23, 2008 11:47 AM