Cadillac 2008 CTS - Page 181

181 . . .
–
Section 1
DVD PRESTOP (DVD pre-stop)
will appear on the display.
To resume playing the disc, press
the / (play/pause) button while
DVD PRESTOP appears on the
display.
The DVD will resume play from the
point where the disc was stopped.
Press the push-button under
(stop) again to stop playing the
DVD audio disc.
DVDSTOP will appear on the
display.
If you press the / (play/pause)
button while DVDSTOP is
displayed, the player will return to
the beginning of the disc.
Audio Streams
When a DVD audio disc is playing,
press the push-button under
AUDIO (audio) to display the
current audio stream.
When the 5.1 Surround Digital
Signal Processing settings are
available, AUDIO STREAM 1 will
appear as an option.
If the 5.1 Surround Digital Signal
Processing settings are not avail-
able, only AUDIO STREAM 2 will
appear.
See "Digital Signal Processing"
earlier in this section.
Press the push-button under
AUDIO gain to toggle between
the settings.
The text field on the display will
change as the audio stream
changes.
Playing MP3 or WMA format
CDs
The CD/DVD audio player will
recognize MP3/WMA format files
stored on DVD-R and DVD+R
discs.
See the following, later in this
section, for more information:
• Playing MP3 or WMA format
CDs (Hard Disc Drive Radio)
AKENG40_CTS Page 181 Wednesday, July 23, 2008 11:47 AM