Starting and Operating Instructions
. . . 336
Vehicle Remote-Start (If
equipped)
This feature is only available on
vehicles equipped with an
automatic transmission.
If enabled, this feature allows you
to start the engine from outside
the vehicle.
To enable or disable this feature,
see "Feature Customization" under
"Driver Information Center" in
Section 1.
CAUTION
Do not idle the engine in a
closed-in place, such as the
garage. Carbon monoxide
(CO) gas could get into your
vehicle.
To start the vehicle using the
remote-start feature, do the
following:
1. Aim the transmitter at the
vehicle.
2. Press and release the lock
button and then
immediately press and
hold the remote-start button
for at least 4 seconds or
until the turn signal lights
flash.
All doors will lock.
When the vehicle starts, the
parking lights will turn on. The
lights will stay on while the
vehicle is running.
A
B
AKENG40_CTS Page 336 Wednesday, July 23, 2008 11:47 AM
To Next Page
Loading...
