53 . . .
–
Section 1
UNITS
To switch your displays between
English and metric units, first
select this item, then press the
button.
PARKING ASSIST
Use this display to enable or
disable the Ultrasonic Rear Parking
Assist feature.
To enable or disable this feature,
do the following:
1. Press repeatedly to select
this display.
2. Press the button to switch
between ON and OFF.
If you select OFF to disable the
system, the PARKING ASSIST OFF
message will appear in the driver
information center display when
the vehicle is shifted out of
P (park).
When the engine is turned off
and back on, the system is
automatically re-enabled.
See the following, later in this
section, for more information:
• Driver Information Center
Messages
• Ultrasonic Rear Parking Assist
AKENG40_CTS Page 53 Wednesday, July 23, 2008 11:47 AM