Cadillac 2008 CTS - Page 77

77 . . .
–
Section 1
MEMORY SEAT RECALL
Note: This feature may not be
available on all vehicles.
This feature allows you to enable
or disable automatic recall of
Memory Feature settings.
Press the button to enter the
submenu.
While in this submenu, press the
button repeatedly to scroll
through the following options:
• OFF
With this setting activated, the
Memory Feature settings will
not be automatically recalled.
This is the default setting.
• ON
With this setting activated, the
Memory Feature settings will
be automatically recalled when
you unlock the vehicle using
the remote keyless entry or
keyless access transmitter.
If equipped with the Telescopic
Power Tilt Wheel Control, the
Memory Feature will also recall
the tilt position of the steering
wheel and the position of the
telescopic steering column.
• NO CHANGE
Once the desired setting is
displayed, press the button to
select it.
You may now either exit program-
ming mode or program the next
available feature.
To exit programming mode, see
"Exiting Programming Mode" later
in this section.
See the following, later in this
section, for more information:
• Memory Feature
AKENG40_CTS Page 77 Wednesday, July 23, 2008 11:47 AM