Auxiliary Commands
The following auxiliary commands can be accessed by
clearly stating the commands exactly as they are
written. The commands are available when the auxiliary
source is available.
Aux, Auxiliary: Use this command to select the
auxiliary device, when a device is connected.
OnStar
®
Command
OnStar: This command instructs the system to connect
to OnStar
®
. You will enter the OnStar
®
voice recognition
system. Refer to your OnStar
®
owner guide for more
information.
Voice Help
Voice help: This command will provide a description of
help commands that can be used.
4-5
To Next Page
Loading...
