How to Inspect the Engine
Air Cleaner/Filter
Vehicles With an Air Filter Restriction
Indicator
Locate the air filter restriction indicator on the engine air
cleaner/filter cover. When the indicator turns black or
is in the red/orange “change” zone, replace the filter and
reset the indicator. See the steps following to replace
the engine air cleaner/filter and to reset the air filter
restriction indicator.
Vehicles Without an Air Filter Restriction
Indicator
To inspect the air cleaner/filter, remove the engine air
cleaner/filter from the vehicle by following Steps 1
through 6. When you have the engine air cleaner/filter
removed, lightly shake it to release loose dust and dirt.
If the engine air cleaner/filter remains caked with dirt,
a new filter is required.
Replacing the Engine Air Cleaner/Filter
and Resetting the Air Filter Restriction
Indicator
1. Locate the air
cleaner/filter assembly.
See Engine
Compartment Overview
on page 5-12.
2. Loosen the four screws on the cover of the housing
and lift up the cover.
5-18
To Next Page
Loading...
