Alerting the Driver
The alert symbol flashes
on the HUD and a
warning beep sounds
when driver action
is required.
Driver action is required when:
• Adaptive Cruise Control cannot apply sufficient
braking because you are approaching a vehicle
too rapidly.
• The vehicle speed drops below about
25 mph (40 km/h).
• A temporary condition prohibits Adaptive Cruise
Control from operating. See DIC Warnings and
Messages on page 3-80 for more information.
• A malfunction is detected in the system.
See DIC Warnings and Messages on page 3-80
for more information.
See Defensive Driving on page 4-2.
{CAUTION:
Adaptive Cruise Control has only limited
braking ability to slow your vehicle. In some
cases, Adaptive Cruise Control may not have
time to slow your vehicle enough to avoid a
collision. Be ready to take action and apply
the brakes yourself. See Defensive Driving
on page 4-2.
3-26
To Next Page
Loading...
