3. Pull the air compressor inflator hose from the
sealant canister.
4. Push the air compressor inflator hose onto the
tire valve stem and push the lever down to
secure in place.
5. Plug the air compressor accessory plug into an
accessory power outlet in the vehicle. See Accessory
Power Outlet(s) on page 3-46 for more information.
{CAUTION:
Idling the engine in a closed-in place or with
the climate control system off can cause
deadly carbon monoxide (CO). See Engine
Exhaust on page 2-38.
6. Start the vehicle. See Starting the Engine on
page 2-29 for more information. The vehicle must be
running while using the air compressor.
{CAUTION:
Inflating something too much can make it
explode, and you or others could be injured.
Be sure to read the inflator instructions, and
inflate the tire to its recommended pressure.
Do not exceed 36 psi (248 kPa).
7. Move the sealant and compressor kit switch to
the I (on) position.
8. Inflate the tire up to the recommended inflation
pressure using the air pressure gage on the top
of the unit.
The pressure gage read high while the compressor
is running. Turn the compressor off to get an
accurate reading.
5-94
To Next Page
Loading...
