Storing the Flat Tire with a Flat Load
Floor
1. Put back all tools as they were stored in the rear
storage compartment and put the compartment
cover back on.
2. Put the flat tire in the tire storage bag, if there
is one.
3. Place the tire, lying flat, in the rear storage
compartment.
4. Route the loop end of
the strap (C) through
one of the cargo
tie-downs (A) located in
the rear of the vehicle.
5. Route the hook (B) through the loop (C).
6. Pull the strap to tighten it around the cargo
tie-down (A).
7. Route the hook end of
the strap through the
wheel.
8. Attach the hook to the cargo tie-down in the rear of
the vehicle.
9. Slide the buckle to tighten the cargo tie-down strap.
Use the following diagram as a guide for storing the
compact spare tire in the trunk.
5-107
To Next Page
Loading...
