Memory Seat and Mirrors
Vehicles with the memory feature have buttons located
on the driver door.
1: Saves the seating position for driver 1.
2: Saves the seating position for driver 2.
S : Recalls the easy exit position.
To program the buttons:
1. Adjust the driver seat including the seatback
recliner, both outside mirrors, and the throttle
and brake pedals. See Outside Heated Mirrors on
page 2-40 and Adjustable Throttle and Brake
Pedal on page 2-25 for more information.
2. Press and hold button 1 for at least three seconds.
Two beeps confirm that the settings have been
saved.
3. Repeat the procedure for a second driver using
button 2.
The vehicle must be in P (Park) to recall the stored
settings.
Press either button to recall the stored setting.
Each time a memory button is pressed, a single beep
will sound.
To recall the stored positions when unlocking the
vehicle with the Remote Keyless Entry (RKE)
transmitter, see DIC Vehicle Customization on
page 3-60.
To stop recall movement of the memory feature,
press one of the power seat or mirror controls.
Easy Exit Seat
S
Press the exit button to recall the exit position when
the vehicle is in P (Park). You will hear a beep.
The memory seat and easy exit features can also be
programmed using the Driver Information Center (DIC).
See DIC Vehicle Customization on page 3-60.
1-5
To Next Page
Loading...
