Map
The map destination entry method allows a destination
to be chosen by scrolling on the map.
I (Map): Touch this screen button from the
DESTINATION ENTRY screen to enter the map
destination entry method, then:
1. Touch the map for the desired area to be set as the
destination.
2. Use the zoom in/out function to view the direction of
the desired area.
3. Pressing/holding and dragging on the map activates
fast scrolling. Press/touch once on the area to which
you would like to move the current position mark.
Once the scroll symbol is on the location, the
address information displays on the map screen.
4. Touch the destination screen button or the waypoint
screen button to save the address as a destination
or waypoint.
• If select this position as a waypoint, the point is
stored as a waypoint. The system displays the
STORED LOCATIONS screen. See “Memory
Points” under Navigation Menu on page 2-18 for
more information.
• If select the h (destination) symbol screen
button the system calculates the route. Select the
Guide screen button to start route guidance.
See “Getting Started on Your Route” later in this
section for more information.
2-46
To Next Page
Loading...
