Removing the Flat Tire and Installing
the Spare Tire
1. Do a safety check before proceeding. See
Changing a Flat Tire
on page 7‑80
for more
information.
2. To remove the center cap, place the chiseled end
of the wheel wrench in the slot on the wheel and
gently pry the cap out.
3. Use the wheel wrench to loosen all the wheel nuts.
Turn the wheel wrench counterclockwise to loosen
the wheel nuts. Do not remove the wheel nuts yet.
Jacking Locations (Overall View)
A. Front Position
B. Rear Position
7-86
To Next Page
Loading...
