Removing the Flat Tire and Installing
the Spare Tire
The tools that are needed include the jack (A), the
wheel blocks (B), the jack handle (C), the jack handle
extensions (D), and the wheel wrench (E).
1. Do a safety check before proceeding. See
Changing a Flat Tire
on page 7‑79
for more
information.
To remove the center cap, place the chiseled end
of the wheel wrench in the slot on the wheel and
gently pry the cap out.
7-84
Ofrecido por www.electromanuales.com
To Next Page
Loading...
