3-4 Storage
8. Insert the shade's pin into the
bent slot (B) and slide it to the
first stop (C) to totally conceal
the cargo area. The shade can
also be positioned at second
stop (A) to partially cover cargo.
Remove the cargo cover
1. Remove the cover from the
channels and carefully roll it
back up.
2. Slide the button on the top to
release the cartridge.
3. Pull up to remove the cartridge
from the pins.
{
WARNING
An improperly stored cargo cover
could be thrown about the vehicle
during a collision or sudden
maneuver. Someone could be
injured. If the cover is removed,
always store it in the proper
storage location. When it is
replaced, always be sure that
it is securely reattached.
Cargo Tie Downs
For vehicles equipped with cargo
tie‐downs, the four tie-downs are
located in the rear compartment of
the vehicle. Use the tie-downs to
secure small loads.
To Next Page
Loading...
