To install a new sealant canister:
1. Align the sealant/air hose (F) with the slot in the air
compressor.
2. Push the sealant canister (B) down and turn it
clockwise.
3. Wrap the sealant/air hose (F) around the air
compressor channel to stow it in its original
location.
4. Push the air compressor inflator hose (F) onto the
sealant canister inlet and push the lever down.
Tire Sealant and Compressor Kit
(With Selector Switch)
System Identification
If the vehicle has the tire sealant and compressor kit
shown above, see the operating instructions that follow.
6-87
Ofrecido por www.electromanuales.com
To Next Page
Loading...
