The tools you will be using include the jack (A) and the
wheel wrench (B).
Removing the Flat Tire and Installing
the Spare Tire
1. Do a safety check before proceeding. See
Changing a Flat Tire
on page 6‑96
for more
information.
2. Loosen all of the wheel nuts, but do not remove
them yet, using the wheel wrench. Turn the handle
about 180 degrees, then flip the handle back to the
starting position. This avoids taking the wrench off
the lug nut for each turn.
6-99
Ofrecido por www.electromanuales.com
To Next Page
Loading...
