10-108 Vehicle Care
Storing the Flat Tire with a
Flat Load Floor (Wagon)
1. Return all tools as they were
stored in the rear storage
compartment and put the
compartment cover on.
2. Put the flat tire in the tire storage
bag, if there is one.
3. Place the tire, lying flat, in the
rear storage compartment.
A. Hook
B. Liftgate Striker
C. Wheel Spoke
D. Wheel Spoke
E. D-rings
4. Route one of the hooks (A), at
the end of the cable provided,
through the liftgate striker (B).
5. Slide both D-rings (E) on each
side of the vehicle as far
rearward as they will go.
6. Route one hook (A) under the
wheel spoke (C) and place the
hook into the slot in the cargo
rail on the driver side of the
vehicle.
7. Slide the D-ring (E) on that side
forward to engage the hook.
8. Route the other hook under the
wheel spoke (D) and place the
hook into the slot in the cargo
rail on the passenger side of the
vehicle.
9. Slide the D-ring (E) on that side
forward to engage the hook.
Storing the Compact Spare
Tire and Tools
Reverse the instructions for
removing the spare tire and tools to
store the compact spare tire.
To Next Page
Loading...
