Vehicle Care 10-31
2. Remove the two screws from the
taillamp assembly.
3. Pull the tail lamp assembly
rearward until the inner pins on
the tail lamp assembly
disengage from the vehicle.
4. Turn the socket anticlockwise to
remove it from the taillamp
assembly.
5. Pull the old bulb straight out
from the socket.
6. Press a new bulb into the
socket, insert the socket into the
taillamp assembly and turn the
socket clockwise into the
taillamp assembly.
7. Reinstall the tail lamp assembly.
When reinstalling, make sure to
line up the pins on the tail lamp
assembly with the vehicle. If the
pins do not line up correctly, the
tail lamp assembly will not be
able to be installed properly.
If the tail lamp, brake lamp,
or indicator need to be replaced,
see your dealer for service.
Number Plate Lamp
1. Remove the two screws holding
each of the number plate lamps
to the moulding that is part of the
tailgate.
2. Twist and pull the number plate
lamp assembly forward through
the moulding opening.
3. Remove the bulb socket from
the lamp assembly by turning it
anticlockwise.
To Next Page
Loading...
