In Brief 1-5
3. Press the brake pedal and select
the ON/RUN/START ignition
mode to drive the vehicle.
Cancelling a Remote Start
To cancel a remote start, do any of
the following:
.
Press and hold / until the
parking lamps turn off.
.
Turn on the hazard warning
lights.
.
Turn the vehicle on and then off.
See Remote Vehicle Start on
page 2-7.
Door Locks
To lock or unlock a door manually:
.
From the outside, if the vehicle
is equipped with Keyless
Access, press the button on the
door handle when the Remote
Keyless Entry (RKE) transmitter
is within range. See Remote
Keyless Entry (RKE) System
Operation on page 2-2.
.
Use the key in the front driver
door. The key cylinder is
covered by a cap. See Door
Locks on page 2-9.
.
From the inside, to lock a rear
door, if equipped, push down on
the door lock knob on top of the
door. To unlock a door, pull once
on the door handle to unlock it,
and again to open it.
Power Door Locks
From the outside, press Q or K on
the RKE transmitter. See Remote
Keyless Entry (RKE) System
Operation on page 2-2.
From the inside, press Q or K . The
indicator light in the switch will
illuminate when locked. See Power
Door Locks on page 2-11.
To Next Page
Loading...
