2-10 Keys, Doors, and Windows
.
Pull the door handle once to
unlock it. Pull the door handle
again to unlatch it.
From outside the vehicle uses the
Remote Keyless Entry (RKE)
transmitter or the key in the front
doors. The key cylinder is covered
by a cap.
Key Cylinder Access
To access the key cylinder:
.
Pull the handle open fully.
.
Slide the cap inward and remove
to expose the key cylinder.
.
Replace cap by sliding back on.
Keyless Access
A locked vehicle can be opened if
the RKE transmitter is within 1 m
(3 ft) of the door handle or the
tailgate touch pad. See Remote
Keyless Entry (RKE) System
Operation on page 2-2.
Free Turning Locks
The door lock cylinder turns freely
when either the wrong key is used,
or the correct key is not fully
inserted. The free turning door lock
feature prevents the lock from being
forced open. To reset the lock, turn
it to the vertical position with the
correct key fully inserted. Remove
the key and insert it again. If this
does not reset the lock, turn the key
halfway around in the cylinder and
repeat the reset procedure.
Power Door Locks
Press Q or K on the Remote
Keyless Entry (RKE) transmitter.
See Remote Keyless Entry (RKE)
System Operation on page 2-2.
Q (Lock): Press to lock the doors.
K (Unlock): Press to unlock the
doors.
To Next Page
Loading...
