4-8 Storage
Installing the Fence
Insert the fence into the adapters
and lock both latches (1) by turning
to align
Q with the arrow on the
adapter (2).
Storing the Fence
1. Lift the cargo management
system cover.
2. Release the cover from the prop
rod as described in the previous
steps.
3. Insert the top of the fence into
the lower two clips (1).
4. Turn the bottom of the fence up
and insert it into the upper two
clips (2).
D-Ring Sliders
If equipped with a D-ring system,
there are four D-ring sliders that
move along rails. These can be
used as tie-downs when storing
cargo.
Insert the D-ring sliders (1) into the
channel (2) located in the middle of
the rail. Press the button to move
the D-ring slider along the rail.
To Next Page
Loading...
